TA的每日心情 | 奋斗 2014-7-16 09:10 |
---|
签到天数: 361 天 连续签到: 1 天 [LV.8]以坛为家I
|
本帖最后由 GY@艳 于 2013-3-11 09:27 编辑
The SAMA5D33-EK is a full-featured evaluation platform for the Atmel SAMA5D33
embedded microprocessor. The kit consists of a main board, a computer module equipped with a SAMA5D33 processor, and a display module. It is supported by the SAMA5D3 Softpack, a free set of bare metal C examples, and is delivered with on-board demos for Linux and Qt-based GUI. The SAMA5D33-EK allows users to extensively evaluate, prototype and create applications that require graphics, audio, mass storage, networking, connectivity and more.
Source files and binaries for the on-board demo are available on Linux4SAM, the entry point to open source solutions for Atmel ARM® core-based embedded microprocessors.
关键特征:
Atmel SAMA5D33 embedded MPU running at 536MHz in a BGA324 package
4Gb DDR2, 2Gb NAND Flash, 128Mb NOR , 32Mb SPI Serial DataFlash, 512Kb EEPROM
JLink and CDC on-board, optional JTAG test access port
MII/RMII Ethernet 10/100 w/PHY
RGMII Ethernet 1Gb w/PHY
Four-wire RS232
Two USB 2.0 Hosts, one USB 2.0 Host/Device
Conexant CX20548 SmartDAA for soft modem implementation
MicroSD card slot
MMC/MMC+/SD/SDIO/CE-ATA
Headphone output, line in and microphone
One 5.0” WVGA resistive TFT LCD module with four QTouch keys
One ISI interface for connection to a CMOS sensor
One HDMI interface
One 10-pin connector for Atmel RZ600 ZigBee® module
Two CAN connectors
|
|